6
Equipment types
R&D & Manufacturing
Quality control from formulation to finished product
Inspection and testing capabilities
Our inspection system covers friction and wear, structural strength, hardness and dimensional accuracy, ensuring performance consistency and assembly reliability from incoming material to finished product.
4
Core test stages
4
Validation categories
100%
Batch outgoing inspection
Core testing capabilities
| No. | Equipment | Purpose | Key parameters | Standards |
|---|---|---|---|---|
| 3 | Constant-speed friction tester | Friction stability at a defined speed; checks design and customer requirements. | 480 r/min adjustable; specimen 25 × 25 mm; 0.98 MPa; ambient–350°C (±2°C) | GB/T 5763 |
| 4 | Friction performance tester | Measures friction coefficient and plots characteristic curves at varying pressure and temperature. | Coefficient 0.00–1.00; resolution 0.001; 0.1–2.0 MPa; ambient–400°C; live data and curves | GB/T 5763 / customer specifications |
| 5 | Wear tester | Evaluates wear rate, service life and wear reliability. | 0–10 × 10⁻⁷ cm³/(N·m); weighing 0.1 mg; 0.5–2.0 MPa; ambient–350°C | GB/T 5763 |
| 2-IN-1 MS3000 friction and wear tester The 2-IN-1 MS3000 combines friction coefficient and wear testing in one workflow. Simultaneous data acquisition improves efficiency and consistency for rapid assessment of friction and wear performance. | ||||
| 6 | Transverse strength tester | Bending and bond strength testing of powder metallurgy components. | Up to 10 kN adjustable; 1–50 mm/min; displacement 0.01 mm; adjustable support span | GB/T 22309; GB/T 5319 / ISO 3325 |
2-IN-1 MS3000 friction and wear tester
The 2-IN-1 MS3000 combines friction coefficient and wear testing in one workflow. Simultaneous data acquisition improves efficiency and consistency for rapid assessment of friction and wear performance.
Basic inspection capabilities
| No. | Equipment | Purpose | Key parameters | Standards |
|---|---|---|---|---|
| 1 | Rockwell hardness tester | Checks surface hardness against technical requirements and wear performance. | HRA / HRB / HRC; preliminary force 98.07 N; total 588.4 / 980.7 / 1471 N; resolution 0.1 HR | GB/T 230.1; ISO 6508 |
| 2 | Video measuring system | Compares measured dimensions with drawings. | 400 × 300 × 200 mm; resolution 0.001 mm; accuracy (3 + L/200) μm; magnification 0.7×–4.5× expandable | JJF 1318 / product drawings |
Technical parameters describe typical configurations; equipment nameplates and technical agreements govern. Test programs can be customized to customer drawings, specifications and applicable standards.
Inspection and testing equipment
